Perler, Hama, and MARD Bead Colors — Pick One Palette Before You Generate
Learn why Perler, Hama, and MARD color codes should stay on separate charts, and how bead color counts and a printable chart keep one brand buildable.
When you turn a photo into a fuse-bead chart, soft camera colors become a grid of named bead shades. That only works if every cell maps to beads you can buy and place. PixoMosaic is a free Perler bead pattern generator and image to bead pattern tool: upload a photo, adjust settings, preview a bead color count, and follow a printable chart on the pegboard. Before you generate, decide on one brand—Perler, Hama, or MARD—and keep that brand for the whole build.
One image, one brand
The same portrait will not match cell-for-cell across a Perler bead pattern maker run, a Hama bead pattern from a photo, and a MARD bead pattern from a photo. Each brand uses its own color names and codes. Your Perler reds are not the Hama or MARD catalog. Generating once under one palette keeps the shopping list, leftovers, and printable chart aligned with what you pour onto the board. Switching brands mid-project is not a translation—it is a new mapping. Treat the brand like a language for the instructions: one language per project.
Why color codes do not mix across Perler, Hama, and MARD
Fuse-bead brands share the craft—plastic beads on a pegboard, fused with heat—not a universal color ID. A “sky blue” code in one catalog may be a different hue, or missing, in another. Mixing codes on one chart looks fine on screen and fails in the hand.
Live PixoMosaic messaging emphasizes Perler-style fuse beads and brand color codes. Hama and MARD matter to many makers as bead systems for inventory planning. Choose the brand that matches the beads you own, and read every code against that brand only.
How to pick a palette before generating
- Inventory first. See which brand dominates your drawers; that is usually the right palette for this free Perler bead pattern generator—or for a Hama or MARD chart if that is what you stock.
- Crop the subject. Busy backgrounds force extra shades and inflate the bead color count.
- Limit colors on purpose. Fewer colors make a cleaner sprite and a shorter list; raise detail only for faces or fine logos.
- Generate, then compare. Check the preview against real beads under your work light. If a shade is missing, buy that code in the same brand or regenerate while keeping fewer colors.
- Optional inventory. Signed-in bead inventory, after email verification, can help reconcile chart counts with tracked stock. This page does not describe a control that limits a new chart to owned colors.
Printable charts and bead color counts
After conversion, use the preview grid, the bead color count per shade, and the printable chart. Counts tell you what to sort or buy; the printout or on-screen guide is what you follow row by row. Shop a Perler-generated chart as Perler—and the same rule for Hama and MARD. Do not refill a missing Perler code with a close Hama bead and expect the fuse to match the preview. Large patterns may need a decision about how many beads fit across one board, or a plan to split the work, before you export.
Quick checklist before you export
- One brand palette for this image
- Color count short enough for your time and budget
- Codes checked against beads you own or will buy in that brand
- Printable chart or export-ready guide ready for the table
Related reading: FAQ, Choosing Bead Palette and Pattern Size, and How to Turn a Photo into a Perler Bead Pattern.
Open the Image to Bead Pattern editor at https://web.pixomosaic.com when you are ready for the next photo-to-chart build.
Related articles
Best Photos for Perler Bead Patterns
The best photos for a Perler bead pattern have a clear subject, strong contrast, fewer color blocks, and a tight crop. Soft gradients and busy backgrounds turn muddy on a bead grid.
MARD Bead Pattern Maker — Photo to MARD Chart
Make a MARD bead pattern from a photo: choose the MARD palette, set width and color limit, then export MARD color codes and bead counts. Keep one brand per pattern.
Perler Pegboard Sizes: 29×29, Multi-Board & Pattern Width
Large square pegboards commonly use a 29×29 peg grid. Set pattern width in PixoMosaic so a Perler-style chart matches one board or a multi-board layout.
How Many Perler Beads Do I Need? Counts & Board Ceilings
Use your chart’s per-color counts, not a board’s maximum pegs. Read the bead color count, add a small spare on dominant colors, then buy or sort.
Pixel Art to Perler Beads: Sprites & Icons That Build Clean
Turn a sprite or icon into a Perler-style fuse-bead chart. Keep flat colors, set pattern width, and export one brand’s codes plus bead counts.
How to Turn a Photo into a Perler Bead Pattern
Use PixoMosaic to turn a photo into a fuse-bead chart: choose a workable image, upload it, tune the grid, read the color counts, and follow an export-ready guide on a pegboard.
Choosing Bead Palette and Pattern Size
Choose a practical color range and grid size so a PixoMosaic fuse-bead chart stays readable and buildable with the beads you have.
How to Read and Export Your Bead Pattern
Learn what the PixoMosaic preview grid and color counts are for, and how to use an export-ready chart while you place fuse beads.